Removing the tensioner

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Detach the tensioner, pull out the fork and lower the tensioner using the threaded bar.

Remove:

mounting 9995659 from the sub frame.
the rails 5740-1 from the control arms.

Install the handbrake cable mountings in the sub-frame.