Secure the sub-frame
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Position and apply mobile jack 9985972 under the left-hand side of the sub-frame.
Install the screws for the support bracket loosely.
Remove screws 9995517 and 9995518 .
Install the screws for the sub-frame. Use 4 new M14 screws. Lubricate the screw threads.
NOTE:
The washer for the front screw.
Transfer the mobile jack to the right-hand side and repeat the procedure as above.
Tighten the screws. Tighten to 105 Nm . Angle-tighten to 120° . Use protractor 9512050 .
Tighten the support bracket screws. Tighten to 50 Nm .