LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 204 (Brake Components - Removal And Installation) >> Brakes >> Brake pipe from hydraulic unit / front wheel / junction, replacing >> Front-rear brake pipe to the rear junctions, replacing >> Remove the brake pipe from its clips

Remove the brake pipe from its clips

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Brake Pipe & Clips
GLL104523Courtesy of VOLVO CARS OF NORTH AMERICA.

Raise the car 

Remove the left front wheel.

Remove the screw from the bracket for the brake pipe and brake hose.

Remove the holder from the brake pipes.

Clean the brake pipe and joint nipple.

Separate the brake pipe at the joint nipple. Counterhold the joint nipple.

Remove the brake pipe from its clips.

Cut the brake pipe at the bracket. Leave the pipe that has been cut in place as a guide for installation of the new brake pipe.