Install the new brake pipe
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Remove the cut-off brake pipe. Install the new one.
Tighten the brake pipe in the joint nipple. Tighten to 22 Nm .
Secure the brake pipe in its clips in the body floor.
Bend and adjust the brake pipe so that it aligns with the hydraulic unit.