Reset the parking brake to the zero position
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Install a hose with an inner diameter of 5 mm on the end of the friction spring (1).
Open the friction spring so that the primary cable runs freely. Use a pipe wrench to push back the primary cable mounting (2).
Insert a 6.5 mm locking pin into the hole in the pedal (3) (it must pass through the bracket, cable pulley, pedal and the other bracket).