LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 191 (Front Spring Struts - Removal And Installation) >> Suspension >> Spring struts, front, replacing >> Wheel knuckle / spring strut, calibrating >> Installing the spring strut / wheel spindle

Installing the spring strut / wheel spindle

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Installing Spring Strut On Wheel Spindle
GLL106794Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the spring strut on the wheel spindle. Use new screws and nuts  .

Adjust in accordance with the measured values.

Tighten to 105 Nm  . Angle-tighten 90°  . Use bevel protractor 9512050 .

scientia non olet · About LEMON Manuals