Installing the lifting beam and lifting hook

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Lifting Beam 9995716 And Lifting Hook 9995460

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install lifting beam 9995716 directly above the engine's lifting eye. Position the lifting beam's brackets as shown.

Connect hook 9995460 to the lifting eye at the rear edge of the engine. Apply the hook to take the load off the engine pads.