Sealing the cover

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Applying Sealant To Cover

Courtesy of VOLVO CARS OF NORTH AMERICA.

Check that the mating surface for the cover is level.

Wipe the cleaned mating surfaces on the cover and gearbox. Use methylated spirit.

NOTE: Make sure that no dirt gets into the transmission.

Apply a bead of sealing compound, approximately 3 mm thick, to the cover. P/N 1161409-6. Apply the compound around the screw holes.