Removing lifting beams and the lifting hook
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Twist in the tab on the cable harness holder.
Install the screw for the gear-shift position sensor and holder. Tighten to 25 Nm
Install the lever on the gear shift linkage rod. Tighten the nut. Tighten to 16 Nm