Installing the control system cover

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Control System Cover, Harness Clamp, Cooler Return Line And Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Reinstall the control system cover on the gearbox. Tighten the screws alternately. Tighten to 12 Nm . Torx TX 40.

Stretch the cable up to the oil temperature sensor.

Install:

the oil pipe on the gearbox with a new O-ring
the return line to the control system cover
the cable harness to the holder on the cover
the ground lead on the transmission