Connecting the cable harness

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Oil Temperature Sensor And Holder Screw

Courtesy of VOLVO CARS OF NORTH AMERICA.

Lubricate the O-rings for the cable harness grommet and the oil temperature sensor with automatic gearbox fluid.

Install:

the cable harness. Connect the connectors to the solenoids
the oil temperature sensor with the holder and screw. Tighten to 10 Nm
the cable harness on the holder. Check that the cable harness is correctly positioned