LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 185 (Front Sub-Frame - Removal And Installation) >> Body & Frame >> Sub-frame front, replacing >> Removing the sub-frame >> Installing the clamp for the servo pressure hose

Installing the clamp for the servo pressure hose

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Clamp On Sub-Frame
GLL106750Courtesy of VOLVO CARS OF NORTH AMERICA.

Tighten the clamp for the servo pressure pipe on the sub frame. Tighten to 10 Nm  .

scientia non olet · About LEMON Manuals