Connecting the breakout box
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Special tools:
- Ignition off
- Remove fuse 11A/4 in the fusebox in the engine compartment.
- Remove the rear view mirror. See Interior lighting and upper electronic module (UEM), replacing
- Remove the cover from the back of the rear view mirror
- Disconnect the control module connector.
Connect adapter 9511463 to the upper electronic module (UEM) connector. Connect breakout box 9813190 or breakout box 9511428 and wiring 9511499 to the adapter.
Disconnect the breakout box in reverse order.
For further information about signals and other values, see Signal specification .