Connecting the breakout box

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Special tools:

9511503

9511428

Fig 1: Breakout Box

Courtesy of VOLVO CARS OF NORTH AMERICA.

Ignition off
Remove fuses 11C/21, 11C/25 and 11C/32 from the fusebox in the passenger compartment
Expose the central electronic module (CEM). See Central electronic module (CEM), replacing .

Connect adapter 9511503 to the control module connector. Connect breakout box 9511428 to the adapter.

Disconnect the breakout box in reverse order.

NOTE: Before the control module can be checked and measurements taken, the removed fuses must first be installed.

For further information about signals and other values:

-2004: see Signal specification
2005-: see Signal specification