Connecting the breakout box
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition off
- Expose the accessory electronic module.
Connect adapter 9512843 to the control module connector. Connect breakout box 9511428 to the adapter.
Disconnect the breakout box in reverse order.
NOTE:
Before the central electronic control module can be checked and measurements taken, the removed fuses must first be installed.
Other information
- For further information about signals and other values, see Signal description. Accessory electronic module (AEM)