Remove housing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Housing Removal

Courtesy of VOLVO CARS OF NORTH AMERICA.

Pull back the rubber cover on the cables
Remove rubber gasket (socket housings only).
Carefully release the clips by bending them out with a small screwdriver (one clip per side).
Depress the catch on the front of the housing and lift the housing out of the connector cover.