Terminal removal tool

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

The terminal removal tool is used for removing cable terminals from connector housings.

Supplementary kits may be introduced later.

Fig 1: Identifying Terminal Removal Tool

GLL101270

Courtesy of VOLVO CARS OF NORTH AMERICA.

Terminal removal tool, p/n 9814228

For cable terminals type 2.8 Tab steel SWS, 2.8 Timer, 2.8 Timer SWS, and 6.3 Timer.

The tool is used when the housing cavity opening has two extraction grooves.

Fig 2: Identifying Terminal Removal Tool 9814229

GLL101269

Courtesy of VOLVO CARS OF NORTH AMERICA.

Terminal removal tool, p/n 9814229

For cable terminal types: 2.8 Tab, 2.8 Tab SWS, 2.8 Timer and 6.3 Tab/Receptacle terminal.

The tool is used when the housing cavity opening has one extraction groove.

Fig 3: 2.1 Pin/Pin Sockets And 3.5 Pin/Pin Sockets

GLL101272

Courtesy of VOLVO CARS OF NORTH AMERICA.

Terminal removal tool, p/n 9814230

For cable terminals of type 2.1 Pin/Socket and 3.5 Pin/Socket.

The tool is used for round housing cavity openings.