Installing the control module
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
- Press the control module into place so that the catch on the rear engages
- Position the connector. Carefully press the connector down.
NOTE:
The pins are fragile. Check that the connector goes straight down into the control module.
- Tighten the screw for the connector
- Check that the connector cover is correctly positioned. Remedy if necessary
- Install the relays and shunts. Note their locations
- Install the integrated relay / fusebox. See Installing the integrated relay / fusebox in the cargo compartment .