Primary locking in cavities
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Cable terminals without locking tab
The primary locking is permanently located in the housing as an integral part of the cavity.
Cable terminals without locking tabs are used with housings which have integral primary locking in the cavities. An example is the 1.6 Pin/Socket.