Removing the carrier plate
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Remove the engine speed (RPM) sensor with the bracket. Place it to one side.
Courtesy of VOLVO CARS OF NORTH AMERICA.
Block the carrier plate using gear sector
9995112
.
Remove:
- all screws
- the carrier plate
- gear sector
9995112
.
Courtesy of VOLVO CARS OF NORTH AMERICA.
Check the crankshaft seal for leakage.