Separating the bevel gear/chain housing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Chain Housing Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the 4 screws. Pull the chain housing straight out from the bevel gear.

NOTE:

Do not place the chain housing with the opening for the bevel gear facing down, oil will run out.