Removing the propeller shaft

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Removal Of Propeller Shaft Using Counterhold

Courtesy of VOLVO CARS OF NORTH AMERICA.

Mark the propeller shaft CV joint in relation to the bevel gear flange.

Remove:

the 2 screws for the center bearing mounting
the propeller shaft screws. Use counterhold 9997057 . Press the propeller shaft joints together. Move the propeller shaft to one side and tie it up.