Replacing the bevel gear/chain housing: Removal: Preparations

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Dip Stick Pipe & Oil Suction Device

Courtesy of VOLVO CARS OF NORTH AMERICA.

Drain the gearbox fluid.

Use an oil suction device to drain approximately 4 liters of gearbox fluid.

Remove the sub-frame. See: Sub-frame front, replacing .