Installing the bracket

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Chain Housing Bracket Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the bracket on the cylinder block and chain housing using 6x M10 screws.

First tighten the screws for the bracket/cylinder block so that the bracket can moves slightly.

Then tighten the two screws to the bracket - chain housing alternately lightly.

Then tighten all the screws.

Install the screws for the fuel line clamp. Tighten.