Replacing the bevel gear/chain housing: Installation: Finishing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Install the sub-frame. See Sub-frame front, replacing .

Fill the gearbox with exactly the same amount of new oil as was drained off. Only use automatic gearbox fluid, P/N 116 1521 (1 liter container) or 116 1621 (4-litre container).

Check the gearbox oil. See Oil level, checking .