Remove the wheel spindle from the control arm
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Pry the control arm with a crowbar. At the same time, lift the wheel spindle and spring strut from the control arm.
NOTE:
Install protective socket 9995562 on the wheel spindle ball joint. Do not damage the rubber bellow for the ball joint.