Removing the mounting screws from the gearbox/starter motor
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Fold the connectors, cable harness and cable conduit out of the way of the engine / gearbox.
Remove:
- the 3 screws for the gearbox / engine
- the 2 screws for the starter motor One screw is located under the starter motor
- the ignition setting sender. Remove it from the mounting.