LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 132 (Left- Hand Drive Shaft - Removal And Installation) >> Driveline/Axles >> Drive shaft, left, replacing >> Removal >> Removing the drive shaft from the wheel hub

Removing the drive shaft from the wheel hub

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Spring Strut And Drive Shaft Removal
GLL109616Courtesy of VOLVO CARS OF NORTH AMERICA.

Pull out the spring strut and remove the drive shaft from the hub. Hold the spring strut to one side using a tensioning strap for more space when removing the drive shaft.

CAUTION:

On later version vehicles, there is a rubber seal on the outer constant velocity joint. Do not damage the seal. It will be needed for installation.

scientia non olet · About LEMON Manuals