LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 129 (Seat Cushion - Removal And Installation) >> Seats >> End mounting, seat, replacing >> End mountings rear (second row), replacing >> Removing rear end mountings (second row)

Removing rear end mountings (second row)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Disconnecting Seat Belt From End Mounting By Pressing Locking Tab With Weatherstrip Tool
GLL141255Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the front seat and the outer seat in the second row in their forward positions.

NOTE:

Disconnect the top edge of the sill trim panel. Disconnect the seat belt from the end mounting by carefully pressing the locking tab with a weatherstrip tool, as shown in the illustration, so that the seat belt releases from the end mounting.

Remove the sill trim panel. See: Sill trim panel, replacing

Move any hoses for the air conditioning (A/C) system to one side.

Remove: 

scientia non olet · About LEMON Manuals