Climate control module (CCM), replacing: Preparations
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Read out the programmed data before replacing the climate control module. This is done in VIDA vehicle communication.
After replacing the climate control module (CCM), the relevant parameters must be programmed.
Move the gear selector/gear selector lever to the rearmost position.
Ignition off.
Remove the key. The key must be removed to ensure that the ignition is not switched on by mistake.
WARNING:
After the key has been removed, wait three minutes before starting work.