Loose connections (terminals)
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Loose connections in terminals may be caused by oxidation of the pins and sockets, or by a faulty connection of a cable to its cable terminal.
Loose connections produce the same faults as an intermittent open-circuit in a cable.
Checks:
- Inspect terminals visually according to Inspect terminals visually .
Continue according to Contact resistance and oxidation .