Removing the pressure lines

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Lock Grip Pliers On Oil Pump Return Hose

Courtesy of VOLVO CARS OF NORTH AMERICA.

NOTE: The graphic displays previous versions, up to and including 2004. From and including 2005 the pressure pipe is secured by a screw and washer.

WARNING: Avoid skin contact with the oil.

Protect the generator (GEN).

Place paper over the generator (GEN) as protection against oil.

Remove the control module coolant pipe.

Install lock grip pliers on the power steering pump return hose.

Remove the pressure line from the power steering pump.