Detaching and installing the upper oil hose and pipe

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Detach and push the upper oil hose away from the oil cooler.

Fig 1: Cutting Pipe

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the cut oil hose and pipe on the oil cooler.

Filling with oil

Fill the plastic container with 2 liters of oil.

NOTE: Only approved automatic transmission fluid may be used.

Fig 2: Plastic Container Hanging Under Hood

Courtesy of VOLVO CARS OF NORTH AMERICA.

Connect the hose from the plastic container to the cut oil pipe. Hang the plastic container under the hood.

Raise the car.