Installing The Left Control Arm

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

For all:

Install the control arm. Use new screws
Tighten the front screws. Tighten to: Tightening torque . Use protractor 9512050
Tighten the rear screw and the nut. Tighten to: Tightening torque

Applies to cars equipped with the 4T65 EV/GT transmissions:

Lower the engine
Tighten the front engine mounting. Tighten to M10, 50 Nm .
Remove the mobile jack