Installing The Center Tunnel Console
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Position the center tunnel console.
NOTE:
Align the gas strut for the cover / arm rest.
Thread in the cable harness at the front edge.
NOTE:
Ensure that the cable harness is not positioned around the console.
Install the 8 screws.
Install:
- the connector
- the lighter socket
- the switch
- lamp, ashtray.
Thread the cable harness into the end panel at the front of the center console. Turn the center console locker into position.
Install:
- the connector at the front center console
- the end panel
- the 2 screws for the end panel
- the connector at the rear of the DVD player
- the connection at the joint on the antenna cable.
Align the center console locker with the front center console and the brackets at the seat belt mounting.
Install:
- the 2 screws
- the coolbox. See Replacing the cool box .
Do not forget the connectors for the seat cushions.
Connect the battery lead. See Battery, disconnecting .