Replacing The In / Out Switch For The Seat / Turn Table: Installation
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
- Install the cable for the switch
- Install the connector
- Install the switch, screws and turn table
- Lift up the screws. Use a screwdriver for example
- Install and tighten the nuts
- Connect the connector
- Reinstall other components in reverse order.