Adjusting the trim strip vertically
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Adjust the trim strip so that it is sealed against the bodywork.
The trim strip can be adjusted vertically by sliding the clips upwards or downwards using a weatherstrip tool.
If the clips are slid upwards, the distance between the strip and the rear windshield is reduced.
If the clips are slid downwards, the distance between the strip and the rear windshield is increased.
Check that there are no gaps between the trim strip and the rear windshield.