LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 105 (Other Electrical Equipment - Cleaning, Inspection And Adjustment) >> ELDON (1999-2006) >> Contact reel driver airbag module, resetting >> Unsecuring the contact reel

Unsecuring the contact reel

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing One Torx 20 Screw
GLL105317Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove one Torx 20 screw.

Fig 2: Turning Contact Reel Clockwise To Limit Position
GLL105319Courtesy of VOLVO CARS OF NORTH AMERICA.

Turn the contact reel clockwise to the limit position.

Fig 3: Turning Contact Reel Counter-Clockwise Two Entire Turns
GLL105318Courtesy of VOLVO CARS OF NORTH AMERICA.

Turn the contact reel counter-clockwise two entire turns. Then turn counter-clockwise further until the screw hole is at "one o'clock" as shown.

NOTE: On later models, the yellow marking must also be visible in the window.