Function test
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition in position II.
- Control lever windshield wiper in resting position.
- Activate the rain sensor function by pressing in the button on the wiper lever. Then the windshield wipers run once back and forth.
- Spray water on the outside of the windscreen (using a spray bottle) where the rain sensor is positioned
- The rain sensor should start the windscreen wiper function and sweep over the windscreen
HINT: Carry out the function test 3 times.
- If the check is carried out with continuous sprays of water, the windscreen wiper will function until the windscreen above the rain sensor is dry.