LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 103 (Bumpers And Attached Components - Removal, Replacement And Installation) >> Bumper With Mountings And Damping (2003) >> Casing, bumper rear, replacing >> Removal >> The rivets in the wheel arch

The rivets in the wheel arch

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Drill Out Rivets Using 6 mm Diameter Drill Bit
GLL105099Courtesy of VOLVO CARS OF NORTH AMERICA.

Raise the car.

Remove the rear wheels.

Drill using a 6 mm diameter drill bit.

Drill out the rivets.

scientia non olet · About LEMON Manuals