LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 100 (Lubricating And Oil System - Removal, Replacement And Installation) >> Oil Pump And Line (B6284T; B6304S3; 1999) >> Oil Pump / Crankshaft Seal, Front, Replacing >> When Only Replacing The Front Crankshaft Seal

When Only Replacing The Front Crankshaft Seal

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Seal Installation Using Tool 9995455
GLL108709Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the old seal. Use extractor 9995919 .

Clean sealing surfaces.

Lubricate and install the new seal. Use drift 9995455 .

Press in drift and seal with crankshaft center nut.

NOTE:

Ensure that the crankshaft does not rotate when pressing in the crankshaft seal.

scientia non olet · About LEMON Manuals