Oil Pump / Crankshaft Seal, Front, Replacing: Finishing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Installing Pulley For Auxiliaries Belt

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install a new timing belt . See Installing the timing belt .

Install the pulley for the auxiliaries belt. Locate the steering gear on the locating pin in the timing gear pulley.

Install the auxiliaries belt.

Install counterhold 9995433 .

Tighten the crankshaft center nut. Tighten to 300 Nm .

Install the vibration damper using new screws . Tighten to 35 Nm . Angle-tighten 50° . Use the crankshaft center nut as a counterhold.