Removing Components

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Piston Cooling Valve And Inner Timing Cover Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove:

the two screws (1) securing the inner timing cover to the cylinder block
the lower belt guard at the oil pump housing.

Press the inner timing cover off the flange around the coolant pump. Start at the lower edge of the pump.

Hold the cover out of the way. Remove the piston cooling valve (2) and the seal washer.