Installing The Timing Belt
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Install:
- the screw securing the inner timing cover to the cylinder head
- the idler pulley. Tighten to 25 Nm
- the timing belt tensioner. Screw in the center screw by hand. Ensure that the fork on the tensioner centers above the cylinder block rib. Check that the Allen hole on the eccentric is at "10 O'CLOCK".
Continue with Timing belt, replacing , from and including section: Installing the timing belt.