Remove The Crankshaft Timing Gear Pulley
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
- Use a universal puller 9986187 and two of the vibration damper's screws.
- Tighten both the screws by hand to stop in the pulley.
- Install the puller so that the claws engage in the screws, not in the camshaft pulley.NOTE:
Make sure that the tool claws do not damage the gear's teeth.