Install The Vibration Damper

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Vibration Damper & Counterhold 9995433

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the vibration damper.

Tighten the center nut to 180 Nm .

Use counterhold 9995433 .

Remove the counterhold. Tighten the screws. Tighten to 25 Nm .

Angle-tighten 30° . Use bevel protractor 9512050 .