Oil Pump / Crankshaft Seal, Front, Replacing: Finishing
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Install:
- front timing belt cover.
Tighten to 12 Nm. .
- the upper timing belt cover
- the auxiliaries belt
- the expansion tank and servo reservoir.NOTE:
Make sure that the hoses are positioned correctly.
- the cross member. Tighten the screws at the suspension turret to 50 Nm and the screw for the engine bracket to 80 Nm .