Throttle Angle

Measurement range 0 - 100 %.

The control module derives the value from the throttle position (TP) sensor, potentiometer 1. The value indicates the throttle opening.

If a fault is detected in the throttle position (TP) sensor, potentiometer 1, by the engine control module (ECM), the value from the throttle position (TP) sensor, potentiometer 2 will be used to represent the throttle angle. This presumes that the function of throttle position (TP) sensor, potentiometer 2 is OK.

0 % = throttle shut.

100 % = throttle fully open.

HINT: The value must follow the parameter "Throttle angle, desired value" when the accelerator pedal (AP) is affected.