LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> Engine Performance >> Tune-Up >> Ignition And Control Systems - Specifications, Other >> Vehicle Communication Information (B5234T3; 2004) >> Description Of Parameters >> Camshaft Shift Angle, (Intake/ Exhaust)

Camshaft Shift Angle, (Intake/ Exhaust)

Intake camshaft reset valve: 6 cylinder engines

Exhaust camshaft reset valve: turbocharged engines

Measurement range between -128 to +128°.

The engine control module (ECM) calculates the value by comparing the position of the camshaft with the position of the crankshaft.

The value indicates the offset of the camshaft 0-position in relation to the crankshaft TDC (0°). (The camshaft 0-position = the camshaft position set alignment with the crankshaft TDC (0°).

HINT: The value must follow the "Camshaft shift angle, desired value" parameter with an accuracy of 10°. Comparisons must be carried out under stable conditions such as stable engine speed (RPM) and load. 

scientia non olet · About LEMON Manuals