Air pressure sensor intake manifold (MAP)
Air pressure sensor intake manifold (MAP) gives the engine control module (ECM) information about the pressure of the air being sent into the engine.
The pressure is given in kPa and sinks with increased engine load (vacuum).
The values should be regarded as approximate.
Air pressure sensor intake manifold (MAP)
| Type | Voltage feed (# component pin) | Value (# component pin) | Miscellaneous (# component pin) |
|---|---|---|---|
| Absolute manifold absolute pressure (MAP) sensor | 5V (#3) | 3.6V = 101 kPa 3.3V = 90 kPa 2.7V = 70 kPa 2.1V = 50 kPa (#1 - #2) |
(#1) output signal (#2) signal ground |